Evidence of meeting #51 for International Trade in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was manufacturing.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Rahmati  Director, Public Affairs, Canadian Institute of Steel Construction
Jamshidi  President and Chief Executive Officer, Niik Steel, Canadian Institute of Steel Construction
Khan  Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium
Ouellet  Chief Executive Officer, STC Manufacturier
Buehler  President, Linamar Agriculture, Association of Equipment Manufacturers
Cook  Executive Director, Canadian Foundry Association
Forgues  Senior Economist, Québec International

4:50 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

Roughly, what's the percentile of foundry products and exports that go to the U.S.?

4:50 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It's close to two-thirds.

4:50 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

What are the potential consequences for the foundry industry if Canada and the U.S. don't reach some form of deal on products currently being tariffed?

4:50 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

The longer it goes on...you're losing customers. You lose those relationships and it's difficult to get them back. One statistic I like to emphasize is that most industries in Canada are about a tenth of the size of those in the U.S. It's similar to our population, 10:1. However, the foundry sector in the U.S. is 20 times the size of the Canadian industry. In large part, it's due to their military industrial complex, but still....

4:55 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

The need for certainty is something many industries have talked about regarding Canada-U.S. trade escalations. Do you or your members echo this sentiment about the necessity for certainty?

4:55 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Absolutely...particularly for investment. Like I said, a lot of things are being put off.

4:55 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

Do you think the government should return to the negotiating table regarding CUSMA?

4:55 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

I think the government will go back when there's a deal that can be signed. I mean, we hope that it's sooner than later, but yes.

4:55 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

Thank you.

Mr. Buehler, first of all, I want to say that I'm a big Linda Hasenfratz fan. I've had the opportunity to meet her and work with her in the Trilateral Commission. If you're communicating with her, please say hello for me.

Your organization, Linamar, is part of a global manufacturing network with extensive ties to the North American market. The same can be said of the AEM. Can you please elaborate on some of the impacts that continued trade uncertainty between Canada and the U.S. is having on your organizations?

4:55 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

I think there were a lot of more direct impacts on our customers. That lack of certainty has really resulted in a change in how our customers buy and the factors that they think about when they're buying. There is certainly a large impact from trade and trade with the U.S. If we look at our AEM companies on the agriculture side, about 46% of the equipment we produce here in Canada crosses the border and is exported to the United States. On the construction side, it's even higher, at 76%.

The impact, particularly on our business north-south of the border, is significant. Certainly we see uncertainty in all of our global markets, which is impacting capital investments and the willingness to spend across Linamar and across all of our industries.

4:55 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

How deeply integrated is the North American supply network when it comes to agricultural equipment?

4:55 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

On agricultural equipment, specifically, I can speak to an example of a business like MacDon. Typically, 30% of our content comes from the United States. If you look at other companies, particularly smaller companies, that percentage can rise as high as 50% or 70%, with products moving over the border to be assembled at a higher level. It could be produced as a subassembly from Canada into the United States, and then the final whole good could be purchased here, or the other way around. We see significant levels of integration between the Canadian and the U.S. supply chains.

The Chair Liberal Judy Sgro

Thank you very much.

Madame Lapointe, go ahead for six minutes, please.

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Thank you very much, Madam Chair.

I'd like to welcome all of the witnesses and thank them for being with us today.

My first question is for you, Ms. Forgues. By the way, my colleague from Quebec City, Mr. Lavoie, couldn't be here today, but he sends his regards.

Our government supports market diversification. Based on your analysis and experience, which poses the greater challenge: a trade mission or securing a first sale?

4:55 p.m.

Senior Economist, Québec International

Rosalie Forgues

That's an excellent question.

The greater challenge likely arises at the first-sale stage rather than at the trade-mission stage. What we're seeing right now is that access to capital is not the primary factor holding businesses back. Rather, it's the strategic adoption of technology and the uncertainty that comes with it.

Once a company secures that first sale, it gains access to a broader audience and a larger platform from which to sell its full range of products. We've seen some companies struggle because we're not what would be considered early adopters of certain technologies or products.

Once a product has been adopted and proven itself in the marketplace, it becomes much easier to generate additional sales.

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Thank you.

My next question is for you, Ms. Cook.

Earlier, you said that two thirds of what we produce here is exported to the United States, but that the American market produces 20 times more than what we produce.

Does that mean that we don't use much of what we produce?

You're saying that the production in the United States is 20 times greater than ours, but you're saying that, despite everything, two thirds of our production goes to the United States.

Is that because our market isn't big enough?

5 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

That may be one reason, but there's also the integration of supply chains in industries such as automobiles, agricultural equipment and so on.

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Those are your figures, right?

5 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Yes, that's right.

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Okay.

When we met not long ago, you told me that defence infrastructure projects would actually create opportunities for Canadian foundries, including in Quebec, of course.

What could we do to get more orders in our supply chain?

You mentioned the buy Canadian policy. I'd like to hear your comments on that.

October 29th, 2026 / 5 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Indeed, an option is to look directly at government procurement and the Buy Canadian policy. I think that's very important. Defence can develop dual-use products. It's important to look into that.

We would really like to see departments and agencies move in that direction.

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

It's a matter of ensuring that Canadian purchases are found throughout the entire supply chain, then.

5 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Yes, that's right.

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Thank you.

Mr. Buehler, you talked about agricultural machinery. Earlier, in response to a question from my colleague, you said that about 30% of the content was American.

Should we continue to work on the Buy Canadian policy and ensure that everything comes from Canada? Are we missing parts that come from Canada?

5 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

It's interesting, because we've certainly adjusted where we buy our components. I think we've identified meaningful exposure to countertariffs, and there's been good activity from the government in terms of remissions.

As an organization, we've looked at reclassifications, sourcing and those types of things. Mitigation itself actually consumes engineering, customs, purchasing and all of those types of things, so those supplier changes can mean validation challenges, especially in the short term for agriculture and even in some types of construction equipment, to get through all of those items.

We certainly have alternatives that are available domestically, but not all items are. Whether it's specialty steels or specialty components, it takes time to build a Canadian supply base for those, and the economics for it may be difficult. Even if those are available, there is both a direct cost in terms of tariff avoidance and also a cost in terms of where we choose to invest our time and resources in building our Canadian suppliers.