Evidence of meeting #51 for International Trade in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was manufacturing.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Rahmati  Director, Public Affairs, Canadian Institute of Steel Construction
Jamshidi  President and Chief Executive Officer, Niik Steel, Canadian Institute of Steel Construction
Khan  Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium
Ouellet  Chief Executive Officer, STC Manufacturier
Buehler  President, Linamar Agriculture, Association of Equipment Manufacturers
Cook  Executive Director, Canadian Foundry Association
Forgues  Senior Economist, Québec International

3:55 p.m.

Conservative

Michael Guglielmin Conservative Vaughan—Woodbridge, ON

You also said in your opening remarks that the TRQs are based off 2024 import levels, which really isn't sufficient when you're looking at volumes and production expectations in today's market. Do you think that should be reviewed?

3:55 p.m.

Director, Public Affairs, Canadian Institute of Steel Construction

Rita Rahmati

Absolutely, because 2024 was reflective of just one year. As we know, construction ebbs and flows. Different years have different project needs. We've always said from the beginning that it should at least be an average of a few years. Also, right now, the Canadian government—it's great to see—is investing more in large-scale projects here in Canada. We have the Major Projects Office. There's a lot of work that can be done here in the next few years, but we need to make sure that we have the supply available to complete those projects on time.

We think that number needs to be reassessed. We've had changes in the market. We've had some mills that have had to have some shutdowns and temporary changes, and then with Stelco leaving that line of business, that product alone needs to be fully reassessed.

3:55 p.m.

Conservative

Michael Guglielmin Conservative Vaughan—Woodbridge, ON

Obviously, Stelco idling their coating lines has compounded this problem. Would you have a recommendation for the government for how they should approach TRQ review?

3:55 p.m.

Director, Public Affairs, Canadian Institute of Steel Construction

Rita Rahmati

They need to work with the entire industry, including the downstream sector, not just the primary side of the industry there. We need to look at what the entire domestic capacity is per product and then look at what the market demand is—not just what the market demand is right now but what it will be over the next year or two years.

Where there are any gaps in what the domestic market can supply and what is needed for the domestic market, we have to either increase those thresholds or look at some exemptions, whether those are temporary or long-term.

We have good trading partners in other countries. We have free trade agreement countries. I absolutely agree that we do not want to be opening up the market to any country that dumps steel, certainly not China. We have the Chinese surtax, which is separate from the TRQs. That could be further strengthened to address any concerns around the dumping of steel, but we have free trade agreement countries that we could be working with better.

3:55 p.m.

Conservative

Michael Guglielmin Conservative Vaughan—Woodbridge, ON

Mr. Khan, [Technical difficulty—Editor].

The Chair Liberal Judy Sgro

[Technical difficulty—Editor] next round.

Mr. Naqvi, go ahead, please.

Yasir Naqvi Liberal Ottawa Centre, ON

Thank you very much, Chair.

I want to thank all the witnesses for being here today and for their valuable testimony.

The prime motivation I had for moving this motion was hearing directly from the manufacturing sector on how best to help diversify to other markets, given the effort by the Canadian government to diversify our trade portfolio and look at markets beyond the United States and Mexico.

My questioning will be along those lines.

I'll start with Mr. Khan.

Thank you for your testimony, for sharing what you are hearing from your members and for the recommendations you provided.

I want to see if we can parse a few of the details in terms of the three things you spoke about, the very first being making it easy to pursue international opportunities or international markets. I think you referred to hands-on help via an “industry connect” program. I'm assuming your organization provides that.

Can you walk us through what that program is? How does it work, and how does it help Canadian manufacturers access new markets internationally?

October 29th, 2026 / 3:55 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

Sure. EMC has been developing what we call “industry connect”, an application that's going to capture the process capabilities of manufacturers.

In order for a manufacturer to sell or even identify who can use their wares.... It's not just a matter of understanding what they sell. Process capabilities include the type of equipment, the type of technology and the types of processes used to do something. That's where it starts to open up opportunities with other countries or manufacturers, as they understand with more certainty how they can work together.

4 p.m.

Liberal

Yasir Naqvi Liberal Ottawa Centre, ON

Was this a program that was created because you heard from your members, and it's being set up to provide a direct service?

The second part of the question is this: What's the metric you're using? How are you tracking the success of a program like that?

4 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

I'll be honest. This application is probably in its infancy. We're just starting. We have fewer than 100 companies in Canada that have started to put their information in.

Long term, the ultimate metric will be how many of them generate new business from said platform.

4 p.m.

Liberal

Yasir Naqvi Liberal Ottawa Centre, ON

Okay.

The second point you raised was around practical support to build those sustained relationships and, I think, the opportunity to have local sales.

Again, from your organization's perspective, what does that look like? Is it support from government so that companies can hire salespeople? Are the trade commissioner services in different markets not sufficient to provide that kind of service for companies that may be looking at entering a new market?

4 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

First, I think the trade commissioner service does a really great job. I've gotten a lot of good feedback from some of our network over the past several months.

It comes down to the fact that we're talking about small businesses that don't know where to start. For instance, we are helping manufacturers navigate getting into defence. Some of those manufacturers are interested in transitioning. That is a very complex process. Quite frankly, people just don't know where to start.

Long term, if there's an opportunity to work with bodies like the trade commissioner service, EDC, BDC and so on, using a special focus to support some of these small businesses, that's what we're asking for.

4 p.m.

Liberal

Yasir Naqvi Liberal Ottawa Centre, ON

It's about having more targeted support for small and medium-sized manufacturers.

As you look at the landscape, are there any particular markets that you think Canada should be focusing on, and is there an approach we can recommend the government create as part of this study?

4 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

I think that's a hard one.

We already have trade agreements. We're not suggesting that we need to create new ones. It's about leveraging the ones we already have. Maybe we could go as far as having a concierge service to help manufacturers understand the business relationships they need to form in these markets.

4 p.m.

Liberal

Yasir Naqvi Liberal Ottawa Centre, ON

Mr. Ouellet, do you have any thoughts on what Mr. Khan is suggesting? What kinds of supports could the Canadian government provide to our Canadian manufacturers to help them access new markets around the world?

4 p.m.

Chief Executive Officer, STC Manufacturier

Martin Ouellet

I wouldn't dare wade into that discussion, but that's our reality as a small business owner. Our company has 70 employees, and our sales are about $11 million. I guess our business is actually a medium-sized business, not a very small one.

Indeed, in terms of discovering or exploring new markets, we are in that situation, at least in Canada, in our case. We devote all of our time to our production and to serving our existing customers. To explore new markets, we would need external resources to support us. That's really where we could use some help, especially looking outside our borders. I look at markets like Europe, but for me to go to Europe, my team needs to be able to support that and adapt products, because products aren't the same in Europe as they are in Canada and the U.S. The products would need to be adapted, and that would require a whole team behind us to support us as an SME.

I think this is where government support would have the greatest impact, perhaps through the channels that Mr. Khan was talking about [Technical difficulty—Editor], but businesses need to be supported so that they can hire engineers, technicians and also people from abroad who will come and work for us, because we have to travel and we have to keep the business operating every day to serve our existing customers. We can't neglect our existing customers to develop new markets. So that's our reality every day [Technical difficulty—Editor] to do so, but in terms of the resources needed, it's harder.

The Chair Liberal Judy Sgro

Thank you very much.

We'll go to Mr. Simard, please, for six minutes.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you, Madam Chair.

Since Mr. Ouellet has so much to say, we'll give him a little more time.

In your opening statement, Mr. Ouellet, you clearly explained the situation you are in. I understood that a sheet of satin coat steel cost $49 in May, that it now costs $84 and that it will cost $98 in January. This means that, by January, if we look at the difference between May and January of next year, the price of your inputs, specifically a sheet of satin coat steel, will have nearly doubled. So I understand very well what that means for your production costs over two days, and you've illustrated that very clearly.

From what I understand, Stelco is currently doing this in Canada, and the other manufacturer is ArcelorMittal. There are no other sources of supply for you.

Are there any sources of supply in the United States? Those sources would, in some way, be subject to tariffs. That's my understanding.

4:05 p.m.

Chief Executive Officer, STC Manufacturier

Martin Ouellet

That's correct. All imports from the United States are subject to tariffs, but the price of American steel is much higher than the price of Canadian steel in the same category. So, in addition to paying tariffs, we would be paying even more per pound of steel.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

I understand from a previous discussion we had that you manage to source supplies because you're a major consumer of steel sheets. So you have some history in that regard. However, a smaller player who still needs that satin coat steel in its production chain might be at a disadvantage because of the current shortage of supply in Canada.

4:05 p.m.

Chief Executive Officer, STC Manufacturier

Martin Ouellet

That's correct. Both small players and heavy users will each get a slice of the pie. If the pie is smaller, some people will end up with a smaller slice. We've already signed agreements, but that's not the case for everyone. In that scenario, there may be a shortage of steel on the market.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

I don't know if you have this information, but right now, when comparing what Stelco used to produce with what ArcelorMittal is producing, how much is being lost? Have we lost 50% of production?

You seem to be indicating that you're not in a position to tell me that.

4:05 p.m.

Chief Executive Officer, STC Manufacturier

Martin Ouellet

I can't answer that question. I don't know the volumes, but from what I understand, Stelco's volume was greater than ArcelorMittal's.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Okay.

So Stelco and ArcelorMittal have to provide steel to all of Canada, including here?

4:05 p.m.

Chief Executive Officer, STC Manufacturier