Evidence of meeting #51 for International Trade in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was manufacturing.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Rahmati  Director, Public Affairs, Canadian Institute of Steel Construction
Jamshidi  President and Chief Executive Officer, Niik Steel, Canadian Institute of Steel Construction
Khan  Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium
Ouellet  Chief Executive Officer, STC Manufacturier
Buehler  President, Linamar Agriculture, Association of Equipment Manufacturers
Cook  Executive Director, Canadian Foundry Association
Forgues  Senior Economist, Québec International

4:25 p.m.

Chief Executive Officer, STC Manufacturier

Martin Ouellet

Stelco stopped producing galvanized steel. Actually, it's not galvanized steel. Galvanized steel and galvanneal are not the same thing. Galvanized steel has a shiny silver finish while galvanneal has a satin finish. Galvanneal is what Stelco stopped producing.

The Chair Liberal Judy Sgro

Ms. Acan, you have three minutes.

Sima Acan Liberal Oakville West, ON

Thank you, Madam Chair.

Thank you to all of our witnesses for joining us today.

Mr. Khan, the EMC works directly with manufacturers to strengthen productivity, develop their workforce and adopt new technologies, which are all essential to competing at home and abroad. That work gives you a valuable perspective on how government support translates into practical opportunities for businesses.

I would like to begin with access to international markets. Trade agreements create opportunities, but businesses need to be able to use them. The federal government has made increasing their use a priority.

Based on the EMC's work with manufacturers, how do you assess whether companies are taking advantage of Canada's existing trade agreements? What are your findings?

4:25 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

I think some are, but we don't think enough small businesses are. As I previously said in my opening, it's hard for manufacturers to understand what resources are available to them and almost, sometimes, where to actually start.

As I said, there are great programs offered, but I think there needs to be some extra attention put on how we can meet the manufacturers where they are and create some easy pathways for them to participate.

Sima Acan Liberal Oakville West, ON

What would be your recommendation for us to approach those businesses? Would it be through local trade organizations or our website? What would you recommend?

October 29th, 2026 / 4:25 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

Bring together some of the key organizations—the trade commissioners being one of them, along with EDC and BDC—with some of the provincial bodies and even some of the municipal ones.

There are a lot of different opportunities and resources that can be leveraged, but I think it's about making sure that it comes together in a way that manufacturers, quite frankly, can understand.

Sima Acan Liberal Oakville West, ON

That was actually my second question. Before I extend to that....

There is a range of programs from the federal government and provincial governments, as well as regional support programs, for a manufacturer looking to enter a new export market. Which part of the system, other than reaching the support programs, is the most difficult to navigate? How would you simplify it?

4:25 p.m.

Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium

Raf Khan

I think the information the trade commissioners provide on the ground is super helpful and will provide a lot of insights, but it's about linking back to the actual business opportunity. That's where there's a gap right now. The trade commissioners cannot help to identify where that [Technical difficulty—Editor] can be sometimes.

The Chair Liberal Judy Sgro

Thank you very much for your valuable information. It's very much appreciated and we know you're having a tough time. We're all listening and looking for solutions to help. Thank you very much for appearing here today.

We will suspend for a moment while we bring the other witnesses to the table.

The Chair Liberal Judy Sgro

I call the meeting back to order.

For the second hour of our meeting, we have with us the president of Linamar Agriculture, Kurt Buehler, for the Association of Equipment Manufacturers, by video conference. From the Canadian Foundry Association, we have Fiona Cook, executive director, here in person. From Québec International, we have Rosalie Forgues, senior economist, by video conference.

Welcome to you all.

I need to remind witnesses that committee members may ask questions in either French or English. If you will need interpretation, please take a moment to get your earpiece. Everybody has their headset on, so everybody should be okay.

We will start with opening remarks from Mr. Buehler, please, for up to five minutes.

Kurt Buehler President, Linamar Agriculture, Association of Equipment Manufacturers

Thank you, Madam Chair.

Madam Chair, members of the committee, thank you for the invitation to appear before you today on behalf of the Association of Equipment Manufacturers.

My name is Kurt Buehler. I am president of Linamar Agriculture. I’m here as a member of AEM’s agriculture sector board.

AEM represents more than 1,100 equipment manufacturers and suppliers across the agriculture, construction, forestry, mining and utility sectors. In Canada, our industry supports more than 147,000 jobs, contributes approximately $24 billion annually to the economy and generates $54 billion in sales and exports. Our members manufacture the equipment that builds roads, homes, ports, energy infrastructure and critical minerals projects, making the industry an essential contributor to Canada's economic growth and productivity.

Today, I would like to leave you with three observations.

First, AEM supports efforts to expand opportunities for Canadian manufacturers in markets around the world. At the same time, we believe trade diversification and a strong North American trading relationship should go hand in hand.

For off-road equipment manufacturers in Canada, the United States will remain our priority market. Since the 1965 auto pact, our supply chains have become deeply integrated, with components often crossing the border multiple times before final assembly. A robust and predictable CUSMA is therefore essential to providing manufacturers with the certainty they need to make long-term decisions about investment and jobs here in Canada.

At the same time, Canada’s growing network of trade agreements creates opportunities for manufacturers to reach new markets. The focus now should be on helping more Canadian companies translate that market access into commercial success.

Government and industry can work together through coordinated trade missions, practical export assistance and continued efforts to address regulatory and non-tariff barriers. Investments in trade-enabling infrastructure are also important to ensuring Canadian products can reach customers efficiently and reliably.

Second, our ability to succeed internationally is closely tied to our competitiveness here at home.

Modern equipment manufacturing is increasingly advanced manufacturing. Automation, precision technologies, data and new production processes are not only changing the equipment we produce but also how we produce it. Canada has an opportunity to build on its strong manufacturing base by creating an environment that encourages companies to continue investing in facilities, machinery, innovation and technology.

People are equally important. Our sector relies on engineers, skilled tradespeople, technicians, machinists, welders and mechanics. We welcome efforts to strengthen apprenticeships, work-integrated learning and industry-led training alongside immigration programs that help address genuine skill shortages.

We also encourage continued collaboration between government and manufacturers on regulatory policy with the goal of achieving strong public policy outcomes while providing companies with the predictability needed to invest and innovate.

Third, we believe Canada can support a strong domestic steel and aluminum industry while also ensuring that Canadian manufacturers remain globally competitive. Our members value strong and reliable Canadian suppliers. At the same time, equipment manufacturing can require particular grades, specifications, components or quantities that may not always be available domestically.

This is an area where balance is important. Trade measures should protect Canadian producers from unfair trade while recognizing the needs of downstream manufacturers that employ Canadians, invest in communities and compete for customers around the world.

Where a commercially viable domestic alternative is not available, transparent and timely remission processes can help achieve that balance. Continued consultation with our producers and manufacturers can help minimize unintended effects elsewhere within the Canadian supply chain.

Canada's equipment manufacturers want to continue building in Canada, investing in Canada and exporting equipment made in Canada to customers around the world. A strong and predictable North American trading relationship, a competitive environment for manufacturing investment and practical efforts to diversify our international trade can all contribute to that objective.

AEM looks forward to continuing to work constructively with parliamentarians to support Canadian manufacturing, Canadian workers and the communities that develop our industry.

The Chair Liberal Judy Sgro

Thank you very much, Mr. Buehler.

Ms. Cook, you have up to five minutes, please.

Fiona Cook Executive Director, Canadian Foundry Association

Thank you, Madam Chair and members of the committee. It's a pleasure to participate in this important study on trade diversification and the competitiveness of Canadian manufacturing.

I am appearing today on behalf of the Canadian Foundry Association. We are the national voice of Canada's metal casting industry.

Canada's foundry sector is a foundational part of the country's manufacturing supply chain. Our industry transforms steel, aluminum and other metals into engineered castings and components used in automotive, aerospace, defence, shipbuilding, agriculture, mining, energy, construction, rail, municipal infrastructure and heavy equipment. Put simply, if something is built in Canada, there is a good chance a Canadian foundry helped make it possible.

To a lesser extent, that could also apply to a significant number of things manufactured in the U.S. We do export, or did export, close to two-thirds of our production south of the border. We've been heavily impacted by the U.S. measures that came into place this past April 1, when the derivative products were heavily tariffed. That applies, obviously, to aluminum and steel, and to copper as well, because bronze and brass alloys contain copper.

The sector generates about $3 billion in annual revenue, supports about 9,000 direct jobs and, with a multiplier of three, supports another 27,000 indirect and induced jobs. There are about 200 foundry establishments across Canada. That is a StatsCan definition. A foundry could be just two people, but they're not necessarily supplying the large manufacturing supply chains. Most are small and medium-sized enterprises operating in communities across the country. We do have a few multinational corporations, but the majority, probably about 95%, are SMEs.

Today, I'd like to make three points to the committee.

First, competitiveness starts at home. Canadian foundries compete internationally while operating within highly integrated North American supply chains. Our customers expect reliable delivery, competitive pricing and access to critical inputs. When trade disruptions occur, foundries feel the effect directly, but they also feel it, of course, downstream due to the reduced demand. For example, we supply steel mills, so we're suffering the extra impact of the tariffs that are applied to that sector in addition to those applied to our shipments south of the border. These increased costs reduce margins, delay investment decisions and make Canadian manufacturers less competitive against foreign competitors.

I'd just like to touch on the uncertainty aspect. We do have a large foundry in Quebec that was going to make a significant investment in a fairly remote area of the province, which would have really helped that community, and they've decided to put it off, of course, as many other foundries have done.

Second, tariffs and trade uncertainty, as I just mentioned, are hurting investment in jobs. Foundries are facing higher costs, reduced predictability and increasing pressure from international competitors. We see that in government procurement. There are a lot of foundry products that are not Canadian. We're hoping to see more of a buy Canadian policy in government procurement moving forward.

Again, as I mentioned, companies have had to reassess capital investments, productivity upgrades and hiring and expansion plans. Because foundries supply virtually every manufacturing industry, these pressures do not stop at the foundry door, and they move through automotive, construction, infrastructure, agriculture, mining, energy, defence and transportation supply chains.

Third, Canada needs a practical manufacturing and trade strategy. Trade diversification is important, and we do have members that are exploring markets in Europe as well as Southeast Asia, but diversification alone cannot replace competitiveness. One of our major issues, as I think you heard from the previous witnesses, is access to skilled labour.

Many foundries are located in remote areas, as well as in urban areas. Many in the more remote areas have been relying on the temporary workforce program. A lot of our members would like to see a path to permanence, because they bring people over, these people get trained—and it costs money to train these people—they get integrated into the community and then they have to go back.

The Chair Liberal Judy Sgro

Ms. Cook, I'm sorry, but I have to cut you off so that we can get to the other witnesses.

Ms. Forgues, please go ahead.

Rosalie Forgues Senior Economist, Québec International

Dear members of the committee, thank you for inviting me to speak today about federal assistance regarding international trade activities of Canadian manufacturers, a central issue that goes well beyond exporting companies only. This is fundamental to preserving and optimizing the competitiveness and sustainability of our businesses.

As the economic development agency for the greater Quebec City area, Québec International's mandates cover foreign investment exploration, productivity and innovation support, talent attraction and retention, business environment promotion, technological entrepreneurship and support for the two centres of excellence that are the video games and animation technocreative sector as well as the life sciences and health technologies sector. Last but not least, our mission includes market development, which is why I'm here with you today.

As a member of the regional export promotion organizations network known as ORPEX, Québec International benefits from a close relationship with businesses and a direct understanding of the challenges they are facing, particularly through on-the-ground initiatives, provincial webinars and round tables.

In a context of persistent trade tensions that precipitate supply chain reorganization and market diversification, economic development agencies play a strategic role. In 2025, through these market development initiatives alone, businesses supported by our organization generated $31.2 million in economic benefits, and our organization offered 2,112 hours of mentorship and supported 44 export and marketing projects.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Excuse me, Madam Chair. When I see the interpreters smiling, it usually means someone is speaking too quickly.

That's our little code.

The Chair Liberal Judy Sgro

Can you slow down a little bit, please?

4:45 p.m.

Senior Economist, Québec International

Rosalie Forgues

Thank you.

Through our trade readiness, matchmaking and trade corridor development services, we act as a catalyst for business growth and diversification. This mandate is particularly important at the moment.

Historically, businesses in Canada and Quebec, including those in the greater Quebec City area and Chaudière-Appalaches region served by Québec International, have built more than 68% of their trade relationships along a north-south axis. While those relationships remain important, they clearly can no longer be the sole foundation for business growth. Greater support is needed to ensure that companies can fully capitalize on existing trade agreements. Moreover, while tariff threats may be targeted, uncertainty is not, and sometimes it can be more damaging than the threat itself becoming a reality.

There are nearly 48,000 exporting businesses in Canada. More than 80% of them have fewer than 50 employees. In the current geopolitical environment, market diversification has become a strategic necessity for these SMEs. However, accessing new markets takes time, capital and a capacity to take on risk, all of which can put pressure on cash flow and debt ratios. It's precisely in this context that government support measures become so important.

In that regard, support measures for Canadian manufacturers facing the cumulative effects of trade tensions since January 2025 are important. These measures are especially significant for strategic, advanced and emerging manufacturing sectors that are at the heart of Canada's efforts to diversify markets, foster innovation and increase productivity. When properly targeted, supports like these help address certain market failures and stop economic shocks from being felt throughout the value chain.

Indeed, these fluctuations can weaken a company's cash position, even when the business remains fundamentally viable over the long term. By facilitating access to financing and temporarily easing liquidity constraints, public support helps preserve productive capital, skills and commercial relationships.

The business community has also welcomed the new federal tax measures, especially the productivity mega deduction. At a time when companies must strengthen their competitiveness, diversify their markets and operate in an increasingly fragmented trading environment, measures that encourage productive investment are a particularly relevant policy tool.

In conclusion, market diversification, accelerated productive investment, support for business modernization and reducing barriers to growth are complementary, not mutually exclusive, levers. Together, when supported by targeted measures, they not only strengthen the resilience of Canadian manufacturers in the face of external shocks, but also enhance Canada's long-term ability to attract investment and support high-quality jobs.

Thank you for your attention. I'll be pleased to answer your questions.

The Chair Liberal Judy Sgro

Thank you very much.

We will open it up to questions.

Ms. Kusie, you have six minutes, please.

4:50 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

Thank you very much, Chair.

I'd like to thank the witnesses for being here today.

Ms. Cook, did you want to make your third point, prior to me commencing the questions? You had three points and you were able to get through two. I thought I'd give you 30 seconds, perhaps, if you want to express the final point.

4:50 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It was on trade strategy, particularly right now, to help our foundries navigate their way through this crisis. Looking at some of the programs that have been offered by the federal government, some of my members are reporting that the responses are not fast enough and it's very unclear what the requirements are.

In particular, under the regional tariff response initiative, there are things called liquidity assistance and pivot projects. Some members applied on September 8 when it came out, and they still haven't heard back. There's an issue there. It needs to be sped up. Companies need to understand why. Apparently, they're being asked for information that has already been supplied.

Those programs are very important and very appreciated, but I think they need to be fine-tuned a bit.

4:50 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

There's room for improvement, it would seem. Thank you very much for that third point.

Ms. Cook, it's nice to see you again, first of all. Secondly, how many workers are employed in the foundry industry in Canada, both directly and downstream, to your knowledge?

4:50 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It's 9,000 direct and 27,000 indirect and induced. That would be induced, as in the community impacts, etc.

4:50 p.m.

Conservative

Stephanie Kusie Conservative Calgary Midnapore, AB

How have the American tariffs affected Canadian foundries to date?

4:50 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It's been quite devastating, particularly for those that rely heavily on the export market. We do have some that supply waterworks or construction, which are mainly Canadian customers, but particularly in areas like automotive, there's a whole... The foundries are all part of those important clusters in Windsor and the Oshawa area that supply automotive. That has heavily impacted our members.