Evidence of meeting #53 for Industry and Technology in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was product.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Chung  President and Chief Executive Officer, Automotive Industries Association of Canada
Denoncourt  Analyst in source reduction, Équiterre
Hatch  Chief Executive Officer, Electronic Products Association Canada
Holtby  Vice-President, Government Relations, Automotive Industries Association of Canada
Bester  Executive Director, Canadian Anti-Monopoly Project
Abar  President, Microland
Chu Cheng  Executive Director, Repair Café Toronto

Karim Bardeesy Liberal Taiaiako'n—Parkdale—High Park, ON

Thank you so much.

The Chair Liberal Ben Carr

Thanks very much.

We're going to have to look into getting Mr. Bardeesy a bell that we ring when he has his line of questioning here.

Mr. Barsalou‑Duval, you have the floor for six minutes.

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Thank you, Mr. Chair.

Mr. Abar, I found your remarks compelling. Despite our desire to improve the repairability of manufactured products that we buy, which I believe is generally wanting, we must be mindful of affordability in a broader and more general sense. For example, certain small items bought in Dollarama stores and pharmacies might present challenges. Bill C‑267 has no threshold above which products should be considered repairable based on their value. Is a dollar value the best measure? If so, at what level should that threshold be set? Should it be $100, $200, $500 or $1,000? I suppose it's really not worth imposing strict repairability standards for something that costs $5 or $10.

12:25 p.m.

President, Microland

Matthew Abar

Yes, there's definitely an issue on the lower end of the product scale. For the manufacturers, it's not even a question of supplying parts. Often, they don't even make parts for lower-priced products. These are generally designed to be exchanged and then recycled. They recycle the older ones.

A dollar value can work. It generally depends on the product category. A laptop at $300 is generally not going to have many parts, but maybe a TV will. There is some variation between product categories.

On the lower end of the product scale, requiring repairability or parts is just not.... It would be a very Canada-specific thing—I'll say that. It's not something that manufacturers are going to—

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Would you say that a product costing $1,000 should still be repairable? Personally, I think it should be repairable. What is the value threshold? Is it $20,000, $1,000 or $500? Don't you have a firm opinion on this?

12:30 p.m.

President, Microland

Matthew Abar

I don't have a specific number in mind, but it would probably be closer to the $100 range, the lower end of the scale.

I agree that there should be some kind of threshold where a lot of these provisions would kick in, but it's closer to the $100 range than the $20,000 range.

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Do any other witnesses have a view on this matter?

12:30 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

I don't have a number in mind, but I agree with my colleague that we should be focusing on the lower end and be very skeptical, because I can imagine those arguments. We start low and then start to creep up, and then important products end up being excluded just because they fall under a dollar-value threshold.

The thing that comes to mind is that products that need to be replaced may be cheaper in the short term, but we're trying to take this longer-term view that more affordable and more accessible repairability might actually save money in the long term.

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Last week we met with a representative from the Canadian Association of Home Appliance Manufacturers. He seemed to argue that having higher repairability standards would be a constraint and that it would result in higher prices. However, in Quebec, this does not appear to have materialized, despite these threats.

One of the things he was opposed to was precisely the requirement to keep spare parts in stock, on-site. I was wondering how, in practical terms, having spare parts in stock would make a product specific to Canada. It seems to me that if a product is sold on the North American market, the spare parts are the same in the United States and in Quebec, and perhaps in other countries, such as Mexico. In what way is the requirement to keep spare parts in stock a problem?

Mr. Bester, could you answer that?

12:30 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

That's a good question.

I think the goal we're trying to achieve here is to think about the market for repairs. Making that easier, opening it up and making it more standard are all things that tend to increase competition and drive prices down.

There may be specific instances in which a part is truly created for Canada. However, as I said in my earlier comments about the U.S. and the EU, Canada really isn't alone in the effort to increase the repairability of products. The more markets are engaged in this, the easier you make it to repair and the more broadly available the information is, the more I can imagine the costs actually coming down.

It's interesting to hear what we're seeing in Quebec at the same time.

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Do you think that Bill C‑267 should include provisions such as granting the minister powers to order a manufacturer to rectify a situation that could not have been anticipated and which would prevent a product from being repaired or which would be anti-competitive?

12:30 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

There needs to be some enforceable element to an approach to right to repair. Whether that lives at the provincial level or the federal level is, I think, something that this consultation can and should investigate. What are the concrete legislative or regulatory responsibilities? Who's responsible and who's going to be accountable for that?

I do hesitate. We work in a number of sectors, and I'm thinking of the grocery sector at this moment. From our experience, an approach through voluntary commitments tends to be less effective because they don't have teeth behind them.

Xavier Barsalou-Duval Bloc Pierre-Boucher—Les Patriotes—Verchères, QC

Thank you very much.

The Chair Liberal Ben Carr

Mr. Groleau, you have the floor for five minutes.

12:30 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Thank you, Mr. Chair.

Mr. Bester, you are the executive director of the Canadian Anti-Monopoly Project. Could you tell us about your organization?

12:30 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

We are a pro-competition, anti-monopoly think tank. We focus on different sectors and different policy areas. We look at where markets are concentrated and at whether there is a monopoly or an oligopoly. We also conduct research and commentary and create policy to deconcentrate markets, increase competition and make those markets more vibrant.

12:35 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Large companies have more resources than smaller players. Aren't you concerned that Bill C‑267 might put pressure on smaller players and, in doing so, favour the industry's major players, thereby allowing them to create monopolies?

October 27th, 2026 / 12:35 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

This is a classic issue with any regulatory action: Who can respond, but at the same time, where can you have the greatest impact by imposing regulations or obligations on major manufacturers?

Our desire to include the small independent repair businesses in this consultation is in part to address that. It's to say that you need to hear from all the parts of the market that are involved in this ecosystem.

Something they've done in other areas is to say that there's a threshold of a business size or numbers of customers. We would think that this would be an interesting aspect to entertain within the consultation, but you're going to have the biggest impact by bringing those bigger players onside when it comes to repairability.

12:35 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Consumers must be able to buy a product at an affordable price. They must be able to choose the product repairer.

Aren't you concerned that the additional requirements will directly drive up prices for these people, the families?

12:35 p.m.

Executive Director, Canadian Anti-Monopoly Project

Keldon Bester

No, I don't think so.

Among other things, I think we have the concept of the lifetime cost of a given appliance or product. For something that may be more cost-effective in the short term, if I'm not able to maintain it and repair it myself and if I have one or two options when it comes to repairability, the upfront cost of it might be lower but I end up paying that further down the line.

We think about that in a lot of different areas not necessarily related to repair. We can go back to our telecom companies. For things that may seem attractive up front, what's their total lifetime cost?

I think that a right to repair, a repairability approach, ultimately brings down that cost.

12:35 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Ms. Cheng, what's the most significant barrier you face to repairing a device? Is it the parts, the software or the cost?

12:35 p.m.

Executive Director, Repair Café Toronto

Wai Chu Cheng

It is the spare parts, but also, we've seen items come in that are made with cheaper materials. For example, someone brings in a kettle. The on and off switch is made of plastic and is no longer working. It's not worth fixing, because you can't get the parts for the switch from the manufacturer.

In this kind of item, such as, for example, levers in toasters that contain plastic material, over time the plastic gets heated and weakens and cannot function consistently. Also, it's hard to get them open when the design is to make it not openable. In items such as lamps, sometimes the casings are glued together. It's hard to open them to check the inside parts of a lamp.

All these things can cost and are hard to repair.

12:35 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Mr. Abar, I'll ask you a quick question. In your experience, will Bill C‑267 lower or increase household bills?

12:35 p.m.

President, Microland

Matthew Abar

I think that if it's done right, it can reduce the overall lifetime cost by reducing the cost of repair.

Our biggest challenge, similar to what Ms. Cheng said, is access to parts and service manuals for brands that we're not authorized for. Making those more broadly available so that we don't have to import the parts from all over the world and search for those parts could reduce the lifetime cost.

As we discussed before, maybe we could have a floor for the cheaper products' prices to remain cheap and to not impose too many rules on units that are otherwise not repairable or designed to be exchanged. I think we can have this bill and keep costs low.

12:40 p.m.

Conservative

Jason Groleau Conservative Beauce, QC

Thank you.