Evidence of meeting #51 for International Trade in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was manufacturing.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Rahmati  Director, Public Affairs, Canadian Institute of Steel Construction
Jamshidi  President and Chief Executive Officer, Niik Steel, Canadian Institute of Steel Construction
Khan  Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium
Ouellet  Chief Executive Officer, STC Manufacturier
Buehler  President, Linamar Agriculture, Association of Equipment Manufacturers
Cook  Executive Director, Canadian Foundry Association
Forgues  Senior Economist, Québec International

October 29th, 2026 / 5:10 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

I would say that it's inevitable, yes.

5:10 p.m.

Conservative

Jacob Mantle Conservative York—Durham, ON

Thank you.

Mr. Buehler, I have a few questions for you as well, in particular on the agricultural side.

I know Linamar is a large producer of agricultural equipment, if I have my facts right. Are you dependent on imports from the United States in the manufacture of those agricultural pieces or that equipment in Canada?

5:10 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

You can look at it in a couple of ways.

When we talk about steel, whether you look at our Linamar companies or more broadly across the industry, we are certainly well supported for certain grades of steel. One of the challenges we have is that different specifications, strengths and specialty mixes are not readily available in Canada. This provides an immediate need to find ways to allow these businesses to carry on and access supply. I know this was a topic addressed at the previous committee....

That also exists when we talk about the interconnectedness of some other key supply items: technologies that are not necessarily fully developed here in Canada or related to specific industries. For some things around rubbers and some things around specific electronics, there is limited ability to develop, in very short order, a Canadian alternative. We certainly see that across all of our industrial businesses, and among many of the suppliers or networks we speak to, across AEM.

5:15 p.m.

Conservative

Jacob Mantle Conservative York—Durham, ON

Thank you.

Last question, can you give us a sense of how your company is affected—or not—by Canadian countertariffs or surtaxes on some of those U.S. goods?

5:15 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

Again, we've taken good action to manage that exposure. There are, on the agriculture side, the U.S. chapter 98 provisions, which allow some agricultural equipment to flow across the border. Chapter 99 was introduced as part of the latest legislation. It allowed us to meaningfully reduce our exposure to countertariffs. Certainly, there was a lot of activity on remissions, classification, sourcing and all that type of stuff.

The mitigation itself consumes engineering resources. We have customs, all sorts of quality approvals and those types of things. You have to remember that we can mitigate those tariffs without really eliminating the cost. Again, it's much more difficult when an organization is a bit smaller because the skills and resources that are involved to keep that going for those businesses are certainly significant. When we talk about things like remissions and policies, we really need to keep contact between government and industry as much as possible, keep the dialogue up—

The Chair Liberal Judy Sgro

Thank you, Mr. Buehler.

I'm sorry. It's just that everybody needs to get their time.

Mr. Ehsassi, go ahead for five minutes, please.

Ali Ehsassi Liberal Willowdale, ON

Thank you, Madam Chair.

Thank you, also, to the witnesses. Your testimony has certainly been very helpful indeed.

I'll start off with Ms. Cook.

Thank you for your remarks. If I'm not mistaken, you were the only individual who brought up the issue of labour. I think it would be fair to say that insofar as this government is concerned, it's all about.... Our number one, number two and number three priorities are to build, build and build.

Could you elaborate on your concern about labour? Tell us if you have any suggestions as to how we can address that issue, and whether our labour force is big enough to undertake all of the projects we're considering.

5:15 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Yes, it definitely is a concern as you look further out. Of course, with the existing labour force, companies are going to be competing for that pool of labour, so it makes it tougher.

As I mentioned, particularly in Quebec, a lot of our companies rely on labour from abroad. Again, anything that can be done to the temporary foreign worker program.... However, once that individual has been trained and has become part of a community, there should be, ideally, a path to permanent residency. That's not available in a lot of cases. I think that's something that needs to be looked at.

It's also asking, what is the definition of skilled labour? It's not always the skills in our minds. We need those trade skills as well. I have heard, too, that just the process of bringing somebody in is very long.

Ali Ehsassi Liberal Willowdale, ON

Absolutely.

Are your comments really focused on rural areas, or would this be of general application across the country?

5:15 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It's mostly for more remote areas because, there, you don't have a lot of companies. Most of the labour supply has gone to a more urban area. Not everybody wants to work in manufacturing. Unfortunately, that is a reality that we face.

Our sector is constantly trying to show that we're upgrading in terms of technology, and people feel that they can make a difference when they're working. Again, when you bring people over from overseas, they need to feel valorisées, as we would say in French. Being able to offer...again, that's really important.

I have a member who had people from the Philippines, and they were just really excellent workers. They had to go back home.

Ali Ehsassi Liberal Willowdale, ON

I'm sorry to hear that.

If I could, I'll go to Mr. Buehler.

At some point in your opening remarks, you were talking about how it's great that we are focused on new markets, but the government could do a better job of explaining where there would be market access and of providing some practical guidance to Canadian companies. Would you care to elaborate on that, if you have any specific ideas?

5:20 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

Certainly.

It comes down to the basis that our message really has to be to continue to negotiate those ambitious agreements, but to place equal emphasis on how we actually implement or utilize them. The government should make some programs such as duty drawbacks or duty deferral easier for manufacturers to access and help those companies manage those costs within the cross-border supply chains. Again, that's for all borders.

There are also the challenges of how you actually sign customers and enter those markets with competitive products, meaning technologically superior. In the case of agriculture, it's how you do things more productively in the field and increase yields. It is also how we have those relationships and the business plans that will support that in the EU or India and allow those businesses to really shine or succeed.

The Chair Liberal Judy Sgro

Thank you very much.

We're on to Mr. Simard for two minutes.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you very much, Madam Chair.

I would like to come back to the labour comment that my colleague Mr. Ehsassi made.

You answered that question very well, Ms. Cook.

I'd like to see what the situation is for you, Ms. Forgues.

I know that your organization is similar to Promotion Saguenay, which has a similar mission to yours and is in my region. Promotion Saguenay is making the matter of temporary foreign workers a pet issue, because it's a major problem in my region.

You probably know, as I do, that the cost of living is lower in the regions than in large urban centres. When we talk about low-wage jobs in the temporary foreign worker program, we have to be aware that the wages offered to employees who have been there for more than 20 years are sometimes lower than the wages of those in positions that the department considers to be low-wage positions.

In Quebec City, do you have to deal with that same dynamic, which makes the Temporary Foreign Worker Program difficult?

5:20 p.m.

Senior Economist, Québec International

Rosalie Forgues

Thank you for the question.

We do indeed face similar challenges in the greater Quebec City area—I'm including Lévis in there; it's in the major urban centre, but on the outskirts of Quebec City—particularly in certain sectors. I'm thinking not only of the manufacturing sector, but also of the construction sector, given all the major public and private projects under way in non-residential tangible capital assets. That inevitably puts pressure on our businesses, so we rely on the various supports available to address the challenges associated with the current context.

While the uncertainty comes from our neighbours to the south, it also arises in an endogenous way within our system. That's unavoidably part of what we're looking at. When it comes to labour force renewal in the greater Quebec City area, our area is the only one of the eight main Canadian census metropolitan areas that isn't meeting its renewal rate.

If we compare the number of young people who are about to enter the workforce with the number of people who will be leaving it, there are approximately 91 young people for every 100 retirees.

Challenges related to the renewal of temporary foreign workers, as well as their pay, inevitably put more pressure on businesses.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you.

The Chair Liberal Judy Sgro

That's your time. Thank you.

We will have Mr. Au and Mr. Naqvi for three minutes each.

5:20 p.m.

Conservative

Chak Au Conservative Richmond Centre—Marpole, BC

I have a question for Ms. Cook.

You mentioned that two-thirds of your members export to the U.S.

5:20 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Two-thirds of exports go to the U.S., yes.

5:20 p.m.

Conservative

Chak Au Conservative Richmond Centre—Marpole, BC

What have been the negative impacts? How much have you dropped in terms of the volumes that you export to the United States right now? Has it dropped by 20% or 30%?

5:20 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It would be about 25% to 30% so far.

5:20 p.m.

Conservative

Chak Au Conservative Richmond Centre—Marpole, BC

Okay.

I have a second question.

We are all talking about diversification, but so far up to now, how much has that been able to compensate for the loss that you had in the States?

5:25 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

I would say that, to date, it's very little. I mentioned that quite a few members are working on developing those markets—again, in Europe and Southeast Asia—but it takes time. Also, they have to factor in transportation costs. Sometimes it just doesn't make sense to ship overseas given the current environment where the shipping costs are quite high.

5:25 p.m.

Conservative

Chak Au Conservative Richmond Centre—Marpole, BC

I see.

5:25 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Also, we have quite a few members in the aerospace area. Again, there's the question of certification, and getting the right certifications in Europe takes time.