Evidence of meeting #51 for International Trade in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was manufacturing.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Rahmati  Director, Public Affairs, Canadian Institute of Steel Construction
Jamshidi  President and Chief Executive Officer, Niik Steel, Canadian Institute of Steel Construction
Khan  Director, Manufacturing Initiatives, Excellence in Manufacturing Consortium
Ouellet  Chief Executive Officer, STC Manufacturier
Buehler  President, Linamar Agriculture, Association of Equipment Manufacturers
Cook  Executive Director, Canadian Foundry Association
Forgues  Senior Economist, Québec International

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Thank you.

You're in the agricultural machinery business.

Has the productivity mega deduction had an impact on your sector, the sector in which you work?

5 p.m.

Liberal

The Chair Liberal Judy Sgro

We need a brief answer.

5 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

For us, not for our customers...? Is that the question?

5 p.m.

Liberal

Linda Lapointe Liberal Rivière-des-Mille-Îles, QC

Yes.

5 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

We certainly see significant investment in productivity and in our facilities as a requirement to competition in Canada. We are certainly, as a medium-sized and larger company, seeing the skills gaps and the need to be more competitive and international being driven by investment in automation, in cobots and in things that will make us more productive.

Certainly, things like the superdeduction and other programs that the government and previous governments have put in, and are continuing to encourage, allow us to compete internationally. That, combined with a lot of our strengths as Canadian businesses really focused on innovation and on bringing value from our Canadian and our domestic markets into those international markets, is really where we can generate—

The Chair Liberal Judy Sgro

I'm sorry to interrupt.

Mr. Simard, you have six minutes, please.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you very much, Madam Chair.

Ms. Cook, in your opening remarks, you noted—as Mr. Ouellet did—that the issue of access to labour was a problem and that there may be work to do on the temporary foreign worker program. I'm saying this because I hope that the report we're going to prepare will include it as a potential solution for the manufacturing sector.

I would like to focus a bit more on the issue of aluminum with you. I come from Saguenay—Lac-Saint-Jean, where the major aluminum smelters are located. I sometimes get the impression that the government doesn't sufficiently distinguish between primary aluminum smelters and the aluminum processing sector. The problem right now is mainly for aluminum processors, who don't have the option of passing tariffs along.

In your opening remarks, you talked about the capacity of foundries. According to you, activity sectors usually have a 1:10 ratio, whereas foundries have a 1:20 ratio, in comparison with the Americans. That doesn't apply in the aluminum sector. We are the largest aluminum producers in North America, and without us, the Americans are unable to meet their needs, so they're captive. However, they aren't captive when it comes to aluminum processing.

I don't know if you're aware of the impacts of the premium called the Midwest premium. That's the premium that has to be paid on aluminum, which includes transportation and preparation costs. One tonne of aluminum costs the same whether it's consumed in my region, in Saguenay—Lac-Saint-Jean, where it's produced, or it's consumed in the American Midwest.

A number of people believe it would be possible to help aluminum processors by playing with that premium. I don't know whether that's something you have studied on your end.

Is your association working on that?

5:05 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

We are certainly in close contact with the aluminum sector, because we also supply its primary plants and processing plants.

What's interesting about the foundry sector is that we could call it the original recycling. We buy “ingots”, then. Is that what they're called?

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

We say “lingots” in French.

5:05 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

It's recycled metal.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

It's remelted aluminum, then, and the auto industry buys that. The thing is that there are no tariffs on remelted aluminum in the United States.

I'd like to come back to what you said about the Pivot to Grow program from the Business Development Bank of Canada, or BDC. It would be good if you could document that.

This was successfully done for the forestry sector. Initially, sales had to be $2 million or more. That was brought down to $1 million, in response to requests from forestry contractors, who don't always have high sales figures. However, we realized that most people in the forestry sector didn't know the eligibility criteria. They were facing rejections without knowing why.

Is it possible for you to provide us with that kind of information about your members? What are the response times? What kind of rejections are they facing? Do they get an explanation for the rejection?

I think it could help the committee improve the tools that the federal government has given itself to address the crisis.

Is that something you could do?

5:05 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Absolutely, it would be our pleasure.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you.

Mr. Buehler, you said something very important in your opening remarks, and I'd like you to speak to it more. Canada will remain dependent on the American market. Right now, the government is making a lot of noise about the possibility of developing new markets. I'm in step with that, and I agree. However, we know very well that developing new markets is not something that can be done in the short term. It's done over the long term, and replacement markets are going to be difficult to set up. Canada is somewhat captive to the American market.

Isn't our most viable solution to find a way to renegotiate the Canada-United States-Mexico Agreement so that everyone wins?

What does the American market represent to you? I'd like to hear your comments on that.

5:10 p.m.

President, Linamar Agriculture, Association of Equipment Manufacturers

Kurt Buehler

I do not understand the issues directly on what I would recommend inside of CUSMA, but I would suggest that we need to preserve that certainty in North American trade, including a strong and durable CUSMA or post-CUSMA. I think any time that we talk about access to new markets, we have to remember that our base and the primary source of our trade and competitiveness is in North America. We have to find a way to do both. Negotiate an ambitious agreement but place an equal emphasis on implementation for our new markets as well as with our existing relationship with the United States.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you very much.

The Chair Liberal Judy Sgro

You have 27 seconds.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

It's Quebec equalization.

The Chair Liberal Judy Sgro

That's very good of you.

Go ahead, Mr. Mantle.

5:10 p.m.

Conservative

Jacob Mantle Conservative York—Durham, ON

Thank you, Madam Chair.

Thank you to our witnesses for appearing and providing their valuable testimony on this topic.

Ms. Cook, I will start with you.

What proportion of your members in the foundry industry would you say import critical components or inputs from the United States into Canada?

5:10 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

I don't have a precise number. I would have to get back to you on that. I know there are some machinery and equipment that come from the U.S., as well as some of those ingots I mentioned before.

We did have a company that managed to get the remissions for those because they couldn't find a Canadian replacement. I will come back with a more precise number, but I would say maybe about 30% of them do, depending on where they're situated.

5:10 p.m.

Conservative

Jacob Mantle Conservative York—Durham, ON

Okay. That's fair enough.

Would you say that the members that do are impacted by Canada's countertariffs or the surtaxes that Canada has imposed on U.S. goods?

5:10 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

Yes, but again, I haven't really heard a lot other than some of these specific cases. It's definitely yes for machinery and equipment.

5:10 p.m.

Conservative

Jacob Mantle Conservative York—Durham, ON

Thank you.

You mentioned in your opening comments that about two-thirds of your members export their products to the United States. Obviously, therefore, the U.S. tariffs on their goods are devastating. Could you give us a sense of where those businesses are at? Can they survive in these current conditions?

If not, what timeline are we looking at before there might be more permanent damage done to your industry?

5:10 p.m.

Executive Director, Canadian Foundry Association

Fiona Cook

I think we're going to see real impacts within the next six months. They're all just trying to hang on. A lot of them are trying to keep their workers as well. Again, this is skilled labour. They've invested in these people, and they're trying to hang on to them. There have been quite a few layoffs, but not complete reductions in production. I would say that within the next six months, we're going to start to see the full impact.

Jacob Mantle Conservative York—Durham, ON

Without a resolution to some of these issues, you expect more layoffs, slowdowns in production lines and things like that in the next six months.