Evidence of meeting #50 for Natural Resources in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was reactor.

A video is available from Parliament.

On the agenda

Members speaking

Before the committee

Mousseau  Scientific Director, Trottier Energy Institute, Polytechnique Montréal, As an Individual
Boutziouvis  Chief of Staff International—Nuclear, AtkinsRéalis
Coupland  Senior Adviser, X-energy Canada
Gitzel  Chief Executive Officer, Cameco Corporation
Cameron  Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council
Gidda  Global Leader, Future Energy, GHD Limited
Varah  Nuclear Energy Leader, GHD Limited

Jennifer McKelvie Liberal Ajax, ON

Thank you, Mr. Chair.

Firstly, I have to say this is the greatest day I've had here, because I'm getting to talk about both geology and isotopes. It couldn't get any better for a former isotope geochemist.

I'm going to start with Mr. Gitzel.

Cigar Lake has one of the coolest deposits in the world. Of course, it's only one of several that you have. I'm wondering if you could speak to what volume you're able to produce right now, where you think you'll be and how it all fits in with the recent deal that you participated in whereby we're going to be exporting more to the world.

6:20 p.m.

Chief Executive Officer, Cameco Corporation

Tim Gitzel

Thanks for that question, and thanks for your knowledge of Cigar Lake. We're very proud. McArthur River and Cigar Lake are the world's two largest high-grade mines. Nobody's even close. Its grade is 100 times the average grade of uranium in most deposits, such as in Kazakhstan and maybe everywhere else. We're very proud that they're in Canada and in Saskatchewan.

We export to the world. Cigar Lake still has many years in front of it. We're spending hundreds of millions to extend the operation there. We're going after some new ore bodies. McArthur River will have 20 to 25 more years of production, so Canada will be the leader.

We just signed a deal in India, as you might have seen, on March 2. The Prime Minister was there, and Prime Minister Modi was there with us. It's for 10 years' supply to India. They would have bought all of our supply forever if they could have. We didn't sell it to them. We don't do that, but they would buy everything.

If you look at a country like India, they have 8,000 megawatts of nuclear electricity, and they want 100,000 by 2047. They need lots of uranium.

China's building eight to 10 new big reactors every year. That's why I say I'm a bit frustrated; we have to get going to catch up.

We're going to need more uranium. The government has approved a couple of new ones in Saskatchewan. They're hard to get going. I've been involved in every one in Saskatchewan over the last 40 years. They're hard, but we have more uranium and more exploration dollars, and we'll continue to be.... We're number two behind Kazakhstan right now, but there's a chance we could turn into the world's largest producer of uranium.

Jennifer McKelvie Liberal Ajax, ON

On exploration, which you mentioned briefly, we have geological surveys with really low-resolution data. As the government looks to invest in critical minerals, and as we work on Arctic sovereignty, for example, and we have more drones out there, should part of our strategy be improving the resolution of our geophysics data in this country?

6:20 p.m.

Chief Executive Officer, Cameco Corporation

Tim Gitzel

Absolutely, it should. We're going to need more. We use the GEOTEM. You'll know all of the resistivity surveys we do. It comes down to drilling at the end, because you have to see what's down there, but yes, there have to be new technologies.

We're applying AI now to all of the data—the core that's out there, which you'd know more about than I would, has been there for 50 years—to see if it can help us pinpoint, so yes, absolutely.

Jennifer McKelvie Liberal Ajax, ON

Certainly, there's really interesting core logging that's happening—going back through old cores with higher-resolution data. There's a lot of potential in that.

I can't forget the isotopes. We have Mr. Cameron here.

First, as we're investing in new nuclear projects—and we have a very ambitious strategy—is it important that we're considering isotope production, particularly radioisotope and medical isotope production, at the beginning as opposed to considering it as an afterthought? Should this be embedded in the process?

Second, we are committed to a national radioisotope strategy. What are the things you want to see in that?

6:20 p.m.

Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council

Evan Cameron

To answer your first question, very simply, yes. We should 100% be thinking about it from the very start.

Something that some other jurisdictions are doing, which we're starting to do but haven't historically done in Canada, is co-locating, for example, processing at the facilities where isotopes are being produced. Bruce Power has just installed some hot cells at their facility to start doing some of the processing, but historically a lot of the processing of isotopes has happened abroad.

As we're looking at new nuclear, if we're going to be selecting reactors that can produce isotopes, certainly, we should be thinking about that from the start and seeing how we can do things like processing locally to the reactors.

On your second question, I don't think we have enough time for me to tell you everything I'd like to see in the radioisotope strategy. The key for us is broad engagement, first of all, not just with industry—obviously, we're an industry association—but also with health care. We can produce endless volumes of isotopes, but if we don't have the medical workforce in Canada to deliver those isotopes to patients, that's a real barrier.

Not to harp on processing, but I also think an expanded focus on processing would be key in that strategy. As I say, historically, using the lutetium example at Bruce Power, a lot of that has been processed in Germany. Some of that could be brought to Canada, potentially, to shore up our domestic supply chain. That's a big one for me.

We do process. For example, cobalt-60 is processed just down the road in Kanata, Ontario, so we do have some capabilities domestically, but from the CNIC's perspective, bringing some more processing to Canada would be key as part of that strategy.

Jennifer McKelvie Liberal Ajax, ON

Mr. Gidda, you talked about the ability to deliver. What I think of particularly are the skilled trades and the workforce. What are some of the predictions about things we should be building a pipeline for to start to encourage people to get into those fields?

6:25 p.m.

Global Leader, Future Energy, GHD Limited

Tej Gidda

From our side, we're primarily an engineering and science-based company, and we see limitations in the amount of engineering that can go into a full plant of this scale. These are very unprecedentedly big pieces of equipment being integrated into the site. More engineering that's specific to this field is required at this point.

The Chair Liberal Terry Duguid

Thank you both.

We are moving on to Monsieur Simard.

You have the floor for six minutes.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you, Mr. Chair.

Mr. Gitzel, I'd like to understand the distinction between AP1000 technology and CANDU technology. Is there a cost benefit or a production time benefit?

What does the production of an AP1000 reactor, in megawatts, look like compared to that of a CANDU reactor?

6:25 p.m.

Chief Executive Officer, Cameco Corporation

Tim Gitzel

That's a good question.

The AP1000 is a reactor that's built already, so you've taken away the design risk. There's no design risk. It's built. It's locked down. It's ready to go. It's licensed in the United States and in the U.K. We have regulatory approval to go ahead with it. We know the fuel that goes into it. We produce it, by the way, which is part of our strategy to build the reactor and then provide the fuel for it.

The risk is on the construction side, as in any large project. The AP1000 can generate 1,100 megawatts, but it requires enriched fuel. We can supply that.

With a CANDU reactor, it depends on which one. Sam talked about, I think, three different varieties they have. I'm not going to say anything about that, because I don't know. They're smaller, for sure. They don't require enriched uranium. They require natural uranium, which we also produce at Cameco.

The difference is that one's a heavy water reactor and requires heavy water, which we also don't produce in Canada right now. We'd have to come up with that somewhere.

They're two different technologies. You know what? In one place, one is the right fit, and in another place, a different one is the right fit. That's why we're of the view that it should be opened up to let the utilities decide what fits best for them. What fits best for Bruce site C? What fits best for Wesleyville? Saskatchewan is going to make a decision, and it's the same thing.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

Thank you very much, that's quite enlightening. If you have any further information on this, perhaps to draw a comparison, I think it might be of interest to the analysts as they draft our report.

This summer, in June, if I remember correctly, the minister announced the federal government's intention to build 10 reactors within 15 years. The mix would include small modular reactors as well. Earlier, Mr. Varah said that no reactors had been built in Canada since 1993. So I wonder how, in 15 years, we are going to manage to build 10 nuclear reactors, even with a mix that includes small modular reactors.

Does that seem feasible to you?

It would be interesting for us to hear your comments on that, Mr. Gitzel and Mr. Varah.

6:25 p.m.

Chief Executive Officer, Cameco Corporation

Tim Gitzel

Thank you for the question.

We have to get started. We have to move from ambition to action, if you want a keyword. We have to get started and get the first one built. We heard about the race to be second or the race to be third. Nobody wants to take the risk on the first one. OPG is taking it on an SMR, so they're going to build that one.

There are three key words: simplify, standardize and sequence. You can't build them all at the same time. It's like what Bruce Power is doing with their refurbs: They're doing one and then moving on to the next one and the next one. You move the workforce along.

That's the same as where we are with building reactors. We do that. We simplify. You have to lock down the design. You can't build a reactor if the design is only 20% complete. It will kill you, and that's what has gotten us into trouble in the past. Standardize and build the same one. Don't let everybody pick their own variety. If you go to the U.S., out of the 94 reactors, I think there are 68 different models. It's terrible.

You have to standardize. That's what the Chinese do. The Chinese can build them in five years for $5 billion. That's about half of what it would be in Canada. You have to do it that way.

We think Canada could probably build four to six at a time, maybe, but you'd have to build them in sequence. You'd start with one, and then a year later you'd start another one. The U.A.E. just did that with their four reactors, and they were successful.

That would be my advice.

6:30 p.m.

Nuclear Energy Leader, GHD Limited

Sam Varah

It's difficult, for sure. I think the key is to have a trained workforce that understands all the technologies we're trying to implement and to try to upskill existing employees and staff at companies that are not currently in nuclear. Give them training that makes them able to work in nuclear design, and make sure they're adaptable. We need a workforce that understands all the technologies and can go from one to the next.

If we diversify our technology, we risk overextending ourselves. We have to make sure that we make those decisions really thoughtfully, consider the long-term implications, and make sure we have a plan for how we're going to resource the design and construction of these things. They're not going to be simple to design or build. We have to really use a lot of foresight there.

Mario Simard Bloc Jonquière—Hébertville—Pays-des-Bleuets, QC

In short, if I understand you correctly, to build 10 reactors, it may not be the best strategy to have a mix of technologies that would include, among other things, small modular reactors. I don't know whether there would be any AP1000 reactors, as you seem to be saying that the government has no interest in that technology, but it would not be the best strategy for the government to use different technologies if it wants to proceed fairly quickly.

Did I understand correctly?

6:30 p.m.

Chief Executive Officer, Cameco Corporation

Tim Gitzel

Pick a technology and get going. Get those first ones going.

There's room for 20 reactors or more in Canada. More than one technology can be used. Let's pick a technology. Let's get going with the first one, and we'll go from there.

Canada can do it. We did it in the past. We built 20 reactors in the past. We can do it again.

The Chair Liberal Terry Duguid

Thank you.

Monsieur Malette, you have the floor for five minutes.

6:30 p.m.

Conservative

Gaétan Malette Conservative Kapuskasing—Timmins—Mushkegowuk, ON

My question is for Mr. Cameron.

If I heard correctly from one of the witnesses, China produces 60% of its isotopes from two CANDU reactors. Those two CANDU reactors supply a facility for the isotopes. Did I understand that correctly?

October 28th, 2026 / 6:30 p.m.

Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council

Evan Cameron

I'm not familiar with that particular example, so I'm hesitant to confirm it on the record.

6:30 p.m.

Conservative

Gaétan Malette Conservative Kapuskasing—Timmins—Mushkegowuk, ON

This is where my question is going: Does producing isotopes reduce the cost of electricity from your reactors?

6:30 p.m.

Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council

Evan Cameron

Not inherently, no.

From the CNIC's understanding, it's more of a bonus. It doesn't really have any implication for the production of power. For example, two of Bruce Power's CANDU units do currently have isotope production capabilities. It has no implication on the production of power. It's just a real bonus for patients and families globally.

6:30 p.m.

Conservative

Gaétan Malette Conservative Kapuskasing—Timmins—Mushkegowuk, ON

I've heard that producing megawatt hours is more expensive with nuclear. I believe we have to put a cost on this bonus.

6:30 p.m.

Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council

Evan Cameron

I would be inclined to agree with that. Absolutely.

6:30 p.m.

Conservative

Gaétan Malette Conservative Kapuskasing—Timmins—Mushkegowuk, ON

Has anyone done that? It becomes very important when you're saving lives.

6:30 p.m.

Manager, Public Affairs and Communications, Canadian Nuclear Isotope Council

Evan Cameron

The CNIC has not put that cost together. I would certainly be inclined to agree with you, sir.

The role that the CANDU reactors currently are playing.... I do have a stat here. Bruce Power and its two units that are producing an isotope called Lutetium-177 supply 70% of the supply of Lutetium-177 for a drug called Pluvicto, which treats late-stage prostate cancer. That is really changing lives around the world, so there is certainly some inherent value on that front.

We obviously deal predominantly on the isotope file. We don't stray too much into nuclear energy in terms of the costs, etc., that you've described. There's clearly inherent value for human health globally.