Evidence of meeting #50 for Human Resources, Skills and Social Development and the Status of Persons with Disabilities in the 45th Parliament, 1st session. (The original version is on Parliament’s site, as are the minutes.) The winning word was apprenticeship.

A recording is available from Parliament.

On the agenda

Members speaking

Before the committee

Herntier  President, Local 2085, International Brotherhood of Electrical Workers
Swick  Executive Director, National Electrical Trade Council

Voices

Oh, oh!

The Chair Liberal Bobby Morrissey

I didn't think of it that way. Thanks for putting in that perspective. You are right. Every time you accept a new position, you're working to work yourself out of one.

Thank you.

Ms. Koutrakis, the floor is yours for five minutes.

Annie Koutrakis Liberal Vimy, QC

Thank you, Mr. Chair.

Thank you to our witnesses for being here today and for sharing your very important recommendations and what you hear and see on the ground. There's nothing like lived experiences to drive a message home.

I would like to get some feedback from you.

The Government of Canada has announced quite a large investment, especially to deal with labour shortages in the skilled trades. Through team Canada strong, we announced $8 billion over five years to recruit, train and hire 80,000 to 100,000 new Red Seal trades workers by 2030-31. A lot of the initiatives in this program are to make sure youth come out benefiting from these investments.

I would like to hear from each of you.

Of the programs we have announced, do you think we're on the right path to make sure we are covering the areas we need to? We have the team Canada strong youth placements program, the Red Seal completion bonus and the build Canada apprenticeship service, where we encourage and help employers hire first-year apprentices. Also, through UTIP, we've expanded apprenticeship training capacity across Canada. There's also the apprenticeship training grant for technical training help, which tops up their EI while they're in trade school.

I'm wondering if we are getting it right. Besides the mobility piece, I want to make sure the programs we are announcing and the investments we are making will attain the results we are looking for.

11:50 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

It's a very good start: the completion grants, the top-up while they are in technical training, and grants to employers for hiring first-level apprentices. We need to create the first-level apprentices first before they can do that.

To get in a lot of these individuals, I think education has to start at a much younger age. I'm not saying that you should be wiring panels and connecting transformers when you're in grade 8, but it's to get rid of the stigma that when you finish high school, you need to go to university. There's absolutely nothing wrong with going to a college and going into some sort of a trades vocation.

11:50 a.m.

Executive Director, National Electrical Trade Council

Chris Swick

To echo Warren, yes, as he said, I think it is a very good start.

When I see that national apprenticeship identification number, it's so beneficial. It would be the only real tracking mechanism we have for where everybody is across Canada as an apprentice. Right now, we rely on other entities to give us this information. Sometimes it's hard to get the accurate information between union and non-union sectors for everybody who's in the trade, and that number is going to be huge.

I think that if we tie that to other systems to make sure the money flows a little more easily, and to some of the bottlenecks that we've addressed for different individuals, like EI payments.... One of the things is that you go to trade school for eight to 10 weeks and you wait. Now, it's a one-week waiting period, but your 10 weeks are done, and you haven't received an EI cheque. That hurts the individual who's taking the training, because they have to make sure they have enough money to make ends meet while they're in training. It adds extra stress, right? That $400 that's going to happen each week, as long as it happens, and if we can reduce the process for EI so it happens a little more quickly.... They're all amazing things.

That's why I always step back and say that these are all great projects. I call them “projects” because this has to actually have that.... You have to put everything together, and you have to make sure it's done properly. You can't just throw it out there and say, “Hey, let's do this.” You have to be very mindful of the approach in what you're doing. Take the time to make sure it's done right the first time, instead of trying to change it halfway through, because halfway through, it might not happen. If you take the time to make sure it's done right the first time, I think we'll have a good program set in place.

The other mechanisms that are there for the request for proposals for the bricks and mortar and stuff like that, all these things are good building blocks. To be honest, I wish it had happened a bit earlier, because maybe then we would not be in the situation we are in today.

Thank you.

Annie Koutrakis Liberal Vimy, QC

Understood, and you also spoke in your recommendations, Mr. Swick, about the very top one—I took some notes—which is to establish a harmonization advisory committee. This isn't the first time during this study that we have heard that. We also heard it from a previous witness. If I'm not mistaken, it was Mr. Strickland.

I'm curious to know how you envision that. Who starts it? Who takes the lead? Can you elaborate a bit as to what the make-up of that committee would be and how it would operate?

11:55 a.m.

Executive Director, National Electrical Trade Council

Chris Swick

I would take the lead. I'm being honest, because I'm super passionate about this. It has to be a committee where we take a look at exactly what you said—Red Seal occupational standards—and make sure all the provinces are aligned. It has to be coordinated with the CCDA to make sure they're on board with it and to make the appropriate changes. That also can be done through the federal government.

All governments and provinces have to be aligned on this to see what the greater good is and to make sure that we can go through everything. We have to have one single-source curriculum and single-source lesson plan, so that everybody delivers the exact same thing. If they want to tap someone on the shoulder, I'll take it. It doesn't matter. It has to be something where we're all doing the exact same thing.

Thank you, Mr. Chair.

The Chair Liberal Bobby Morrissey

Thank you so much, Madam Koutrakis.

We're going to do one more round, if it's agreeable to the committee, because these are the only witnesses we have.

With that, we'll go with Ms. Falk for five minutes. Then we'll go to the government and then to Madame Larouche for two and a half minutes.

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

Thank you very much, Chair.

I want to get more insight on safety standards. I'm wondering, are there provinces or territories that have similar standards or even the same standards, where that makes it easier for trades workers to go back and forth if needed?

11:55 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

If you were to take a look at working at heights or fall arrest, you would see that a lot of the provinces do recognize other tickets, but in Ontario they've definitely set the bar high when it comes to safety training such as that.

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

I was interested in fall arrest and fall protection, but also confined space. Sometimes you're doing that. There's the WHMIS and that type of thing.

Is there also a situation where a worker is then going somewhere else, to a different province or territory, and they need different tickets or different certifications? Who's responsible for that? Is it the project? Is it the company, the contractor, the union or the worker?

11:55 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

It would depend on the project. From our side of things, a lot of the time, the individual requires this ticket before they can go onto that site, so then it's out of their pocket. There are times when the contractor will bring them out, supply the training and send them for it.

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

Do you have any examples? You gave Ontario as an example for height when it comes to fall arrest and fall protection, but are there any other jurisdictions that we could be looking at—or that I could be looking at, as somebody who is interested in and studying this—that have the bar or are the easiest to go to and work in when it comes to safety standardization?

11:55 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

When you're saying the easiest, do you mean to have—

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

I don't mean the lowest bar. That's not what I'm saying.

I'm saying where it's the easiest to transfer your safety certification in one province to another province to work. It's the least bureaucratic, or it has an even standard.

11:55 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

As an example, between Manitoba and Saskatchewan, you can pretty much use the safety standards in both places.

It will also depend on the project. If you're going to, say, the oil field, you might need the H2S.

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

Sure. You might need your H2S, which might be site-specific or region-specific.

11:55 a.m.

President, Local 2085, International Brotherhood of Electrical Workers

Warren Herntier

Yes, but for a general construction project, there are a lot of provinces where they are interchangeable. As I said, Ontario has definitely set the bar, and there's nothing wrong with that.

11:55 a.m.

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

Are there any that are not interchangeable, so anybody who goes there and isn't from there is going to have to recertify?

Chris.

October 22nd, 2026 / 11:55 a.m.

Executive Director, National Electrical Trade Council

Chris Swick

There are lots.

I'll give you an example about working at heights, because we're talking about that. Ontario's working at heights standard basically mimicked Newfoundland's. If we take our working at heights tickets and go to Newfoundland, they won't accept them. We have to take their training, which doesn't make much sense.

I know the premiers were supposed to try to do a national standard for safety training that the tickets would be—

Noon

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

When was that supposed to happen?

Noon

Executive Director, National Electrical Trade Council

Chris Swick

It's already happened.

Noon

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

It's already happened. Okay.

Noon

Executive Director, National Electrical Trade Council

Chris Swick

It's already happening, but it fell off a bit, because the premiers were supposed to go....

What has to happen, if they want to do it simply, is they have to go through the regulations and have that national credentialing for the safety training on certain ones. They have to put in just “and/or” and then list the tickets. You go through the regulations and change them. I know it sounds simple and it has to go to committees and stuff, but at the end of the day—

Noon

Conservative

Rosemarie Falk Conservative Battlefords—Lloydminster—Meadow Lake, SK

Without compromising what the—